This quick start shows how to start obniz Board.
Please prepare obniz Board, Smartphone(or PC) and Portable Battery Pack.
Power supply is required from mobile battery or PC.
Turn on the obniz Board by plugging in a USB.
To shutdown, just unplug the cable.
When Board starts up, Wi-Fi setting method is displayed.
Here, proceed with Wi-Fi settings on the Board.Please select [SIMPLE METHOD].
The cursor is moved when turn the dial switch.Click the dial switch to selest.
obniz Board will show a Wi-Fi SSID list on its OLED. Choose one by moving the switch towards left or right, and confirm selection by pressing the switch.
Type the password one by one by using the dial switch.
When you mistyped, choose [BACK] to delete one character. When you finish, choose [END] to connect.
QR code will appear on its OLED when successfully connected to Wi-Fi and obniz Cloud.
The 8-digit number displayed is the obnizID.
Please read the QR code displayed on the obniz Board with your smartphone. The program editor will open.
Please open the Program editor. When prompted for obnizID, please enter your obnizID (the 8-digit number displayed on your obniz Board).
Tap (click) [Run] at the top right of the screen to open the run screen and run the program.
In the initial state, character input and LED ON / OFF buttons are displayed and can run programs.
The program ends by closing the execution screen.
Circuit for Starter “obniz Board” is available on Amazon and other online stores.
You can get it at below
Visit our developer’s forum to discuss and discover technologies.
Feel free to contact out support and technical team.Contact us