Preparation and Build

The kit contains parts for assembling an Robot.

  • Cardboard ×3 for Main part
  • Motor ×2
  • Caster
  • Tire ×2
  • Distance sensor
  • Distance sensor cable
  • Micro USB cable(※)
  • obniz Board(※)
※Kit(obniz Board is not included), USB cable and obniz Board are not included.

Things necessary

In addition to the Kit, a smartphone , mobile battery and Wi-Fi are required.

Things necessary

Step0. Connect obniz Board to Wi-Fi

First, connect the obniz Board to Wi-Fi.
Check the Quickstart for how to start and connect Wi-Fi.

Step1. Remove unnecessary parts

Remove unnecessary parts

Step2. Assembling the Robot (Inner parts)

Assemble the inner parts. Use the second largest cardboard parts.

Assemble the second largest cardboard parts

Step3. Assembling the Robot (outside parts)

Assemble and combine the remaining two cardboard parts.

Assemble and combine the remaining two cardboard parts.

Next, attach the motor and tires.
Insert the shaft of the tire into the hole of the main body and attach the motor.

attach the motor and tires

Step4. Assembling the Robot (Combine parts)

Combine the parts assembled in Step2 and Step3.

Step5. Attach casters and distance sensors

First, attach the casters.Paste the casters on the body.

Next, attach the distance sensor with double-sided tape.

Step6. Connect to obniz Board

After putting the cord on the obniz board, place it in pocket.


Next : About Block Program

You will Get in Few Days

Circuit for Starter “obniz Board” is available on Amazon and other online stores.
You can get it at below

Our products and resellers


Visit our developer’s forum to discuss and discover technologies.



Feel free to contact out support and technical team.

Contact us