How to view arduino log with obniz

Hardware Configuration.

To connect them, you need to connect the obniz device to the arduino serial The arduino's serial

Note that arduino serials have different pin assignments for different devices.

SerialBaudRate

https://www.arduino.cc/reference/en/language/functions/communication/serial/

Use these SERIAL PINS (pins to connect to the PC for writing).

Connects arduino's serial to obniz's serial.

VCC, GND, RX, and TX connections are required.

Software.

Checking arduino serial logs remotely

All you have to do to see the log is connect uart.

Let's write a program.

Let's write a program that uses

var obniz = new Obniz("OBNIZ ID HERE"); 
obniz.onconnect = async function(){
  var baud = 115200; // configration for UNO
  obniz.uart0.start({tx: 0, rx: 1, baud:baud });  

  obniz.uart0.onreceive = async function(data, text) {
    console.log(text);
  }   
}

void setup() {
  Serial.begin(115200); 
}

void loop() {
  Serial.print("Hello");  
  delay(2000);
}

The caveat here is that you need to match the communication speed.

Serial.begin(115200);written on the Arduino side is a yellow balloon BaudRate, thevar baud = 115200` written on the obniz side is a blue BaudRate.